8 Things to Know About The SYSTEM-500 Complete Set

SYSTEM-500 Complete Set
The Roland SYSTEM-500 Complete Set is a fully analog recreation based on Roland’s classic SYSTEM-100M. The modules have been adjusted to conform to the Eurorack standard. Below is a list of some other enhancements and useful bits of information to help you get the most out of the modules. SYSTEM-500 Complete Set Contributed by Roland Canada

1. The SYSTEM-500 is Ready to Play

The SYSTEM-500 Complete Set comes with all five modules, a power supply, and a Eurorack case. It is ready to start patching right out of the box. The SYR-E84 case comes with a cover and carrying handle, making it convenient for gigging musicians.

2. Normalized KEY Inputs

The 512 module contains two identical voltage controlled oscillators. The KEY CV inputs are normalized to be linked together. This means that both oscillators will track to the same CV when voltage is sent to only one KEY input. This is useful when creating sounds that use two oscillators. The range controls still work independently for each oscillator, allowing them to be tuned apart by whole octaves. This can come in handy when creating a sub oscillator or for FM sounds.

3. High Pass Filter

The 521 module contains two 24db low pass filters. In addition, there is also a high pass filter with two cutoff settings. This can be used to shave off the low end from the output of the filter.

4. Six Channel Mixer

The 530 module contains two voltage controlled amplifiers. Each amplifier has three inputs, each with its own level control. The SUM outputs are a mix of the outputs from both amplifiers. This allows the 530 to be used like a six channel mixer.

5. Cycle Mode

The 540 module contains two envelope generators and a low frequency oscillator. The envelope generators can be switched to cycle mode. This allows them to be used like two additional low frequency oscillators, with the attack and decay times controlling the rate and shape.

6. Normalized Effect Modulation

The MOD source for both the phaser and delay in the 572 module are normalized to the module’s LFO, so you can modulate the effects without any patching.

7. Extended Delay Time

The range of the delay effect in the 572 has been extended beyond that of the original 172 module. The first half of the DELAY TIME knob is the entire range of the original module, and the second half has a longer delay time. This longer time allows the clock signal to be lowered into audio range. Use a low pass filter to remove the high frequency tone from the clock.

8. Extra Octave

The octave switches on the 512 module can turn beyond the indicators on the panel. This gives an extra octave of range.

Related Articles

TR-8 AND EFFECTS – PART 3: MODULAR EFFECTS ROLAND ICON SERIES: THE ROLAND SYSTEM-100 SYNTHESIZER AIRA MODULAR: WHAT IS A MODULAR SYNTHESIZER? THE A-TO-Z OF SYNTHESIZER TERMS

Related Product

SYSTEM-500 Complete Set

Related Posts

Scroll to Top

SIGN UP TO DOWNLOAD
THIS TD-50 CUSTOM PATCHES

Created by Roland V-Drums specialist Simon Ayton, these patches were designed using the internal factory sounds and many of the techniques covered in the TD-50 guide. Enjoy exploring the possibilities!